Yes. The Cryptnox Crypto Hardware Wallet – Dual-Card Set can hold Livepeer (LPT) as an ERC-20 token on Ethereum or as an ERC-20 equivalent token on Arbitrum One. LPT is not pre-programmed on the cards; add the token or network once during setup. It uses an 0x-prefixed 20-byte EVM address, with private keys generated inside the secure element and never leaving it.
CRYPTNOX products are also available worldwide through our official Amazon stores.
Livepeer (LPT) is supported with Cryptnox through two EVM token routes: Ethereum and Arbitrum One. On Ethereum, LPT is an ERC-20 token. On Arbitrum One, LPT is held as an ERC-20 equivalent token on that network. In both cases, the receiving address is an 0x-prefixed 20-byte EVM address controlled by the private key protected by the Cryptnox card.
LPT is not a separate Livepeer-native account type in the Cryptnox setup. It is an EVM token that becomes visible after the relevant token or network route is added. That distinction matters before you send funds: the card protects the key for the EVM address, while the selected network determines where the LPT balance appears.
The official Livepeer documentation describes Livepeer as an open video infrastructure protocol, and the project’s own LivepeerToken contract shows the token context. For Cryptnox asset coverage and route checking before setup, use the Cryptnox coin and blockchain support page.
The Dual-Card Set does not arrive with LPT already enabled in the wallet view. After the cards are initialised, add LPT once as a token, or add the required network first if your flow needs Arbitrum One before the token can be shown there. The card does not need a special Livepeer address; it uses the same EVM address format for the Ethereum and Arbitrum One LPT routes.
This separation prevents a common EVM misunderstanding. Initialising the cards creates the wallet and backup. Adding LPT makes a specific token route visible and usable in the app or connected wallet flow. If LPT is not shown at first, that does not mean the card cannot hold it; it means the token or network route still needs to be added.
If you need help separating card initialisation from token or network addition, the Cryptnox hardware wallet tutorials are the right place to review the setup flow before moving LPT.
For LPT, control of the token depends on control of the private key for the 0x EVM address. The Cryptnox model is built around keeping that key inside the card. Private keys are generated inside the secure element and never leave it. When an LPT transaction needs to be signed, the card signs without exposing the private key outside the secure element.
The card contains an EAL6+-certified chip. That chip-level property belongs to the secure chip platform, where the private key is created and kept. For an LPT buyer, the practical point is not whether LPT is preloaded. The important point is that the key controlling the Ethereum or Arbitrum One address is created in the secure element and stays there.
The free Cryptnox app is available on iOS and Android. It connects to Web3 via WalletConnect and works with MetaMask, so an LPT holder can use the card-protected EVM key through those connection paths while keeping the private key inside the secure element. The Cryptnox Crypto Hardware Wallet – Dual-Card Set is the product for this card-based LPT setup.
The Cryptnox Crypto Hardware Wallet – Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, and the second card becomes the backup for the same wallet. For LPT, that backup protects access to the same EVM wallet structure used for the Ethereum and Arbitrum One token routes.
The standard setup does not require writing down a recovery phrase by default. Instead, the second card is created as the backup during initialisation. That matters for LPT because the token may exist on either Ethereum or Arbitrum One, but access still depends on the protected key for the relevant 0x address.
Importing an existing BIP39 recovery phrase is available as an advanced option. The default Dual-Card Set approach is different: initialise both cards together, let the seed be generated inside both secure elements, and keep the second card separate as the backup before you add LPT or move funds.
Ethereum LPT and Arbitrum One LPT use the same 0x-prefixed EVM address format, but the routes are not interchangeable. On Ethereum, treat LPT as an ERC-20 token. On Arbitrum One, treat LPT as an ERC-20 equivalent token. The address may look familiar in both places, yet the network selection still decides where the token is received and shown.
Before sending LPT to a Cryptnox-controlled address, decide which route you are using and add that route in the wallet flow. If you are receiving LPT from an Ethereum source, use the Ethereum token route. If you are receiving LPT from Arbitrum One, use the Arbitrum One route. The card protects the same kind of EVM key, but the token balance belongs to the selected network.
If you are still deciding whether this card format fits your broader custody setup, the Cryptnox hardware wallet collection hub explains the product family. For LPT specifically, the supported token routes to focus on are Ethereum and Arbitrum One.
The Cryptnox card is a contact and NFC smart card. You can tap it to a phone or insert it into a reader. For an LPT holder, the physical format matters because the card is the signing device for the EVM address, while the app or connected wallet flow is where the Ethereum or Arbitrum One token route is selected.
Unlock uses the phone’s face or fingerprint unlock through the Cryptnox app. The card itself has no fingerprint or face sensor. The card’s job is to protect the private key inside the secure element and sign when the LPT flow requires approval.
The cards are made in Switzerland, and the product is Swiss-engineered. The format is useful for LPT because it keeps the protected EVM key on a portable smart card while still allowing app-based operation on iOS and Android.
LPT should be handled through its Ethereum or Arbitrum One EVM token route. Do not treat a different asset page as the receiving path for LPT. If you are setting up a separate Tron holding, use the Cryptnox Tron hardware wallet guide for that asset instead. If you are setting up Bitcoin, use the Cryptnox Bitcoin hardware wallet page rather than applying those instructions to LPT.
The same caution applies when you are comparing EVM-related pages. A page such as the Cryptnox Polygon hardware wallet guide may involve an EVM address format, but the LPT routes described here are Ethereum and Arbitrum One. For LPT, the decisive checks are the token standard, the selected network, and the 0x-prefixed 20-byte address.
Before sending, confirm three items: the route is Ethereum or Arbitrum One, the token being added is LPT, and the receiving address is the EVM address controlled by your Cryptnox setup. That is the buyer-level check that matters more than the visual similarity between EVM-style addresses.
No. LPT is not pre-programmed on the cards. After initialising the Dual-Card Set, add LPT once as a token, or add the required network route first if you are using Arbitrum One. LPT is then held at an 0x-prefixed 20-byte EVM address controlled by the card-protected private key.
You can hold LPT as an ERC-20 token on Ethereum or as an ERC-20 equivalent token on Arbitrum One. Both routes use an 0x-prefixed 20-byte EVM address. Choose the route that matches where the LPT is being sent from or managed.
The private key for the EVM address is generated inside the secure element and never leaves it. The card contains an EAL6+-certified chip, and signing is done with the card when LPT activity requires approval. The protected key controls the address that holds LPT on Ethereum or Arbitrum One.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card becomes the backup for the same wallet. That backup applies to the EVM address used for LPT after you add the Ethereum or Arbitrum One token route.
No. The default Dual-Card Set setup uses the second card as the backup, with the seed generated inside both secure elements during initialisation. Importing an existing BIP39 recovery phrase is an advanced option, not the standard setup path for a new LPT wallet.
Yes. The free Cryptnox app is available on iOS and Android, connects to Web3 via WalletConnect, and works with MetaMask. For LPT, those connection paths provide the interface for Ethereum or Arbitrum One activity while the Cryptnox card protects the EVM private key.
No. The card itself has no fingerprint or face sensor. Unlock can use the phone’s face or fingerprint unlock through the Cryptnox app. The card’s role is to keep the private key inside the secure element and sign LPT activity when required.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.