Yes — the Cryptnox Crypto Hardware Wallet – Dual-Card Set can hold Alchemy Pay ACH as the ERC-20 token on Ethereum, or as an equivalent EVM-chain token representation added manually by contract and network details. ACH is not pre-programmed on the cards. It uses a 0x-prefixed 20-byte EVM address, with private keys generated inside the secure element and never leaving it.
CRYPTNOX products are also available worldwide through our official Amazon stores.
Alchemy Pay ACH is held on Cryptnox through the EVM route. On Ethereum, ACH is the ERC-20 token. On EVM-compatible chains, including BNB Smart Chain and Alchemy Chain, ACH is held as an equivalent token representation that you add manually with the correct network and contract details.
The Cryptnox cards do not arrive with ACH already enabled. For an ACH buyer, setup is a one-time network or token addition, not a preloaded asset selection. Use Add a Token when Ethereum or the relevant EVM network is already present. Use Add a Network first when the EVM network still needs to be added.
The account format for ACH is a 0x-prefixed 20-byte EVM address. That address style applies when you receive ACH as the Ethereum ERC-20 token and when you configure an equivalent ACH representation on another EVM-compatible network. Before sending funds, check that the network selected in the app or connected Web3 tool matches the ACH representation you intend to hold.
For buyers comparing ACH with broader asset coverage, the Cryptnox coin and blockchain support page is the place to review network and asset coverage alongside this ACH-specific setup route.
On Ethereum, ACH is the ERC-20 version of Alchemy Pay. The Ethereum token contract can be checked on Etherscan’s ACH token page before you add the token to your setup. That check matters because the Cryptnox cards secure the key for your EVM address, while the network and token details you enter determine which ACH balance is displayed and used.
If Ethereum is already present in your setup, the ACH action is an Add a Token step. If you are configuring a different EVM network first, use Add a Network before adding the ACH token representation for that network. The card does not choose between Ethereum ACH, BNB Smart Chain ACH, or Alchemy Chain ACH on your behalf; the route follows the network and contract information you add.
Once Ethereum ACH is added, the card-backed account can receive and sign for that ERC-20 token. The private key controlling the address is generated inside the secure element and stays there while the app or connected Web3 tool prepares the transaction data.
ACH can also be handled as an equivalent token representation on EVM-compatible chains, including BNB Smart Chain and Alchemy Chain, after manual setup. These are network-specific representations. The same 0x address format may appear across EVM networks, but the token balance you see depends on the network selected and the token contract added.
Alchemy Chain documentation describes ACH as a gas token and cross-chain asset. If you are using ACH on Alchemy Chain, add the Alchemy Chain network information first, then add the ACH token representation for that network if your setup requires a token entry. The Cryptnox card secures the key for the EVM address; it does not convert one network’s ACH representation into another.
For an ACH holder, the custody decision is not only about where the private key is stored. It is also about choosing the correct EVM route before funds move. Ethereum ACH belongs on the Ethereum network as the ERC-20 token. BNB Smart Chain ACH and Alchemy Chain ACH require their own EVM network context.
This is why ACH is described here as manually added rather than shipped enabled. Manual setup keeps the chain choice explicit: add Ethereum for ERC-20 ACH, or add the relevant EVM network and token representation for ACH on another EVM route.
The Cryptnox Crypto Hardware Wallet – Dual-Card Set secures the private key that controls your ACH EVM address inside smart-card secure elements. Private keys are generated inside the secure element and never leave it. For ACH, that means the key for the 0x address is not exported to the phone app or to a Web3 interface when an ERC-20 or EVM-chain transaction is prepared.
Each card uses an EAL6+-certified chip. That certification applies to the chip platform. For an ACH buyer, the practical point is that signing is tied to the secure element that created and stores the private key, while ACH remains an Ethereum ERC-20 asset or an EVM-chain representation identified by the network and contract details you added.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card is the backup for the same wallet. By default, there is no recovery phrase to write down. Importing a 12- or 24-word BIP39 recovery phrase is available as an advanced option, but it is not the default setup path for the Dual-Card Set.
If this backup model matches the way you want to hold ACH, the Cryptnox Crypto Hardware Wallet – Dual-Card Set product page shows the two-card product to order before adding ACH network or token details.
The Cryptnox app is free on iOS and Android, and ACH is added through the app setup route rather than arriving as a pre-programmed card asset. Use Add a Token for Ethereum ACH when Ethereum is already available in your setup. Use Add a Network first when the ACH representation you intend to hold is on an EVM-compatible chain that is not yet present.
After ACH is configured, the Cryptnox app connects to Web3 through WalletConnect and works with MetaMask. In that flow, the Web3 tool can prepare an EVM transaction for Ethereum ACH or for an ACH representation on another EVM network, while the card is used to approve signing from the secure element that holds the private key.
If you want the product workflow before entering ACH-specific network details, start with the Cryptnox hardware wallet tutorials, then add ACH using the Ethereum or EVM-chain route you intend to use.
For an ACH transfer on Ethereum, BNB Smart Chain, or Alchemy Chain, the Cryptnox card can be tapped to the phone running the Cryptnox app, or inserted into a reader for a contact smart-card workflow. The form factor is dual-interface: contact and NFC. That matters for ACH because the same card-backed EVM address can be used while you choose the network-specific ACH route in the app or connected Web3 tool.
Unlock uses the phone’s biometrics through the Cryptnox app. The card itself has no fingerprint reader or face scanner. For ACH signing, this separates the phone unlock step from the secure element that generates and stores the private key for the 0x address.
The Swiss-engineered cards ship uninitialised, which fits the ACH setup flow: first initialise the Dual-Card Set so both secure elements hold the backup seed, then add Ethereum ACH or the EVM-chain ACH representation you plan to receive. The card format does not make ACH pre-enabled; the network and token setup still decides which ACH representation is shown.
ACH on Cryptnox should be compared with other assets by address format and network route. Ethereum ACH uses a 0x-prefixed EVM address as an ERC-20 token, and equivalent ACH representations on BNB Smart Chain or Alchemy Chain also follow the EVM address model. That makes ACH a manual EVM setup rather than a pre-programmed card asset.
If you are comparing ACH with another asset-specific buying path, the Cryptnox Polygon hardware wallet page gives you another network-focused page to review. If you want to compare ACH with a different asset route, the Cryptnox TRON hardware wallet page is another asset-specific page for buyers.
ACH can also be evaluated beside other card-backed wallet pages before you choose what to order. The Cryptnox Bitcoin hardware wallet page and the Cryptnox Ronin RON hardware wallet page help you compare asset pages without mixing up ACH’s Ethereum ERC-20 route and EVM-chain representations. For the wider collection, the Cryptnox best crypto hardware wallet hub helps you move from ACH to other wallet use cases.
Buy the Cryptnox Dual-Card Set for ACH when you want the private key for a 0x EVM address generated inside secure elements, with a second card created as the backup during setup. The ACH part is manual: add Ethereum ACH as the ERC-20 token, or add the correct EVM network and ACH token representation for BNB Smart Chain, Alchemy Chain, or another EVM-compatible route.
The right purchase decision is whether this card-based key and backup model fits the ACH route you plan to use. If it does, order the Cryptnox Crypto Hardware Wallet – Dual-Card Set, initialise both cards, and then add the ACH network or token details before receiving funds.
No. ACH is not pre-programmed on the cards. You add it once as the Ethereum ERC-20 token or as an equivalent token representation on an EVM-compatible network. Use Add a Token when the network is already present, or Add a Network first when the EVM network still needs to be configured.
ACH uses the EVM address format on Cryptnox. That means a 0x-prefixed 20-byte address for Ethereum ERC-20 ACH and for equivalent ACH token representations on EVM-compatible networks such as BNB Smart Chain or Alchemy Chain. Always match the address with the network route you intend to use.
Yes. ACH can be held as an equivalent token representation on Alchemy Chain after you add the relevant EVM network and token details manually. The cards do not ship with Alchemy Chain ACH already enabled, so the setup depends on the network and token information you enter.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card is the backup for the same wallet. By default, there is no recovery phrase to copy and store separately before holding ACH on the card-backed EVM address.
No. The card has no fingerprint reader or face scanner. Unlock uses the phone’s biometrics through the Cryptnox app. The card’s role in an ACH transaction is to keep the private key inside the secure element and approve signing for the EVM address.
Yes. The Cryptnox app works with MetaMask and connects to Web3 through WalletConnect. Add the correct ACH token and network details first, then use the card-backed EVM account to approve transactions while the private key remains inside the card’s secure element.
The default Dual-Card Set setup generates the seed inside both secure elements, making the second card the backup. Importing a 12- or 24-word BIP39 recovery phrase is available as an advanced option, but it is not the default path for a new ACH setup.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.