Yes. Cryptnox supports 1INCH when you add it as an ERC-20 token on Ethereum or as the BEP-20/equivalent EVM token on BNB Chain. 1INCH is not pre-programmed on the card, so you add the correct network or token route once in the Cryptnox app. Both routes use an 0x-prefixed 20-byte EVM address, with private keys generated inside the secure element and kept there.
CRYPTNOX products are also available worldwide through our official Amazon stores.
1INCH is not a separate preloaded profile on the Cryptnox card. A buyer who wants to hold 1INCH sets it up as an EVM token route: Ethereum for the ERC-20 version, or BNB Chain for the BEP-20/equivalent EVM version. The official 1INCH token page identifies the token, and the official BNB Chain 1INCH page identifies the BNB Chain deployment.
The setup decision matters because Ethereum 1INCH and BNB Chain 1INCH are not the same route inside the app. They share the same EVM-style address format, but the chain selected in the Cryptnox app determines which token route you are preparing to receive and manage.
If you are checking 1INCH beside other assets before buying, review the Cryptnox coin and blockchain support page while keeping the Ethereum and BNB Chain 1INCH routes separate in your own setup plan.
Choose the Ethereum route when the 1INCH you want to receive or manage is the ERC-20 token on Ethereum. Choose the BNB Chain route when the 1INCH you want to receive or manage is the BEP-20/equivalent EVM token on BNB Chain. The card does not decide that chain route for you; you select it when adding the network or token in the Cryptnox app.
The visible address begins with 0x on both routes, so do not use the address prefix alone as proof that the right chain has been selected. The 1INCH token entry in the app must match the chain where the token is being used. A 1INCH ERC-20 entry is the Ethereum route. A BNB Chain 1INCH entry is the BNB Chain route.
For a closely related EVM-style comparison, the Polygon hardware wallet guide is useful because Polygon assets also require attention to the selected EVM route rather than the address prefix alone.
For 1INCH, the private key behind the 0x-prefixed EVM address is generated inside the Cryptnox secure element and never leaves it. That protection applies whether you add the Ethereum ERC-20 token route or the BNB Chain token route. The balance is associated with the chain and token route, while the private key stays inside the secure element that controls the address.
The chip used for the 1INCH key environment is an EAL6+-certified chip. That certification describes the chip platform, not the finished card product. For a buyer comparing 1INCH storage options, the important point is that the EVM private key is created inside the secure element rather than being generated externally and copied onto the card.
This matters when the same 0x-style address format appears in both supported 1INCH routes. The secure element protects the key. The Cryptnox app route tells you whether you are preparing the Ethereum ERC-20 1INCH entry or the BNB Chain 1INCH entry. Those two checks work together: protect the key on the card, and select the right chain in the app.
The Cryptnox Crypto Hardware Wallet – Dual-Card Set ships uninitialised, so a new 1INCH setup begins when you initialise the cards. During that setup, the seed is generated inside both secure elements. The second card is therefore the backup for the same 1INCH-capable EVM wallet, rather than a blank spare card that needs a separate recovery process later.
There is no recovery phrase to write down by default when creating a new 1INCH wallet with the Dual-Card Set. That default fits an EVM token workflow because the buyer can create the wallet, add the Ethereum ERC-20 or BNB Chain 1INCH route, and keep the backup as the second physical card from the same setup.
Importing an existing 12- or 24-word BIP39 recovery phrase is an advanced option. That is different from the default path for a new 1INCH buyer, where both cards receive the seed during initialisation inside their secure elements.
You can buy the Cryptnox Crypto Hardware Wallet – Dual-Card Set from the official shop when you want the two-card backup model for an Ethereum or BNB Chain 1INCH route.
The free Cryptnox app on iOS and Android is where you add the 1INCH route and use the card. If Ethereum is the route, add 1INCH as the ERC-20 token. If BNB Chain is the route, add 1INCH as the BEP-20/equivalent EVM token. If the chain route itself is missing, use Add a Network; if only the token entry is missing, use Add a Token.
Unlock for the Cryptnox app can use the phone’s biometrics. The Cryptnox card itself has no fingerprint or face sensor, so the physical card remains the secure element that protects the 1INCH EVM private key while the phone handles the app unlock step.
The card is a contact and NFC smart card. For a 1INCH buyer, that means the same card can be tapped to a phone for app use or inserted into a reader when that contact smart-card workflow is preferred. The product is not limited to a single interface, and 1INCH still has to be added as the correct token route before it is used.
For walkthroughs on card setup and app use, the Cryptnox hardware wallet tutorials are the right place to review the setup flow before adding the 1INCH token route.
The Cryptnox app connects to Web3 via WalletConnect and works with MetaMask. For 1INCH, start by adding the token route that matches where your 1INCH exists: ERC-20 on Ethereum or BEP-20/equivalent EVM token on BNB Chain. After that route is present, the Web3 connection path can be used where a supported wallet flow asks for a wallet connection.
The 1inch Help Center describes 1inch as a decentralized exchange aggregator, and the 1INCH token belongs to that 1inch context. When using a Web3 connection path, the Cryptnox card protects the private key for the 0x address, while the app and connection method provide the route into the wallet flow.
If you also use non-EVM assets, the Bitcoin hardware wallet guide is a useful contrast because Bitcoin does not use the same 0x-prefixed EVM address format as 1INCH.
The product for this 1INCH setup is the Cryptnox Crypto Hardware Wallet – Dual-Card Set. It is a contact and NFC smart-card hardware wallet for buyers who want to protect the private key behind an Ethereum or BNB Chain 1INCH address and keep the second card as the backup created during initialisation.
The cards are made in Switzerland, and the product is Swiss-engineered. For 1INCH, the buying checklist is practical: confirm the chain where your token is held, add the corresponding route in the Cryptnox app, verify the 0x-prefixed 20-byte address, and keep both cards secure after setup.
If 1INCH is one asset in a broader wallet plan, the Cryptnox hardware wallet collection gives the product-category overview, while the support page helps you confirm asset routes before setup. Buyers who also hold Tron can use the Tron hardware wallet guide to separate Tron planning from the EVM route decisions required for 1INCH.
No. 1INCH is not pre-programmed on the card. Add it once in the Cryptnox app as an ERC-20 token on Ethereum or as the BEP-20/equivalent EVM token on BNB Chain. Use Add a Network when the chain route is missing, or Add a Token when only the token entry is missing.
You can add 1INCH on Ethereum as an ERC-20 token or on BNB Chain as a BEP-20/equivalent EVM token. Both are EVM routes, but they are separate setup choices in the app. Choose the route that matches where your 1INCH is held or expected to be received.
Both supported 1INCH routes use an 0x-prefixed 20-byte EVM address. Because Ethereum and BNB Chain can both show the same address style, confirm the chain route in the Cryptnox app instead of relying only on the 0x prefix.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card becomes the backup for the same wallet that can hold the 1INCH route you add. There is no recovery phrase to write down by default.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.
Yes. Importing a 12- or 24-word BIP39 recovery phrase is available as an advanced option. The default 1INCH setup for a new Dual-Card Set is different: the seed is generated inside both secure elements, and the second card is the backup.
No. Unlock uses the phone’s biometrics through the Cryptnox app. The Cryptnox card itself has no fingerprint or face sensor. For 1INCH, the card’s role is to protect the private key for the 0x-prefixed EVM address inside the secure element.
Yes. The Cryptnox app connects to Web3 via WalletConnect and works with MetaMask. Add the correct 1INCH route first: ERC-20 on Ethereum or BEP-20/equivalent EVM token on BNB Chain. Then use the supported connection path when a wallet flow asks you to connect.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.