Yes. Cryptnox supports FRAX by adding Fraxtal as an EVM network for the native coin, or by adding the Ethereum ERC-20 legacy token at 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0. FRAX is not pre-programmed on the card; you add the relevant route once through Add a Network or Add a Token. The asset is the current version of the token formerly known as FXS, and its wallet address uses a 0x-prefixed 20-byte EVM format.
CRYPTNOX products are also available worldwide through our official Amazon stores.
The Cryptnox Crypto Hardware Wallet – Dual-Card Set can be used for FRAX through two specific EVM routes. For native FRAX, add Fraxtal as a network. For the Ethereum legacy token, add the ERC-20 contract 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0. The card does not arrive with this asset already configured, so the first practical decision is whether the FRAX you want to hold is on Fraxtal or Ethereum.
Both routes use the same general address shape: a 0x-prefixed 20-byte EVM address. That makes the address familiar to Ethereum users, but it does not make the two routes interchangeable. A Fraxtal native-coin entry is created by adding an EVM network. The Ethereum route is created by adding a token contract on Ethereum.
If you want to check broader asset coverage before buying, the Cryptnox coin and blockchain support page is the place to compare supported networks and assets with this FRAX setup path.
FRAX is the name to use when setting up this asset today. Official Frax documentation describes the rename and upgrade from the former FXS ticker, which is why buyers may still search for an older name while the current asset label is FRAX. The setup choices on Cryptnox follow the current asset route: Fraxtal for the native coin, or Ethereum for the ERC-20 legacy token.
The name change does not remove the need to choose the correct chain entry. On Fraxtal, you are adding a network because FRAX is native there. On Ethereum, you are adding a token because the route is an ERC-20 contract. The official Frax FRAX overview gives the protocol context for the current naming, while the Frax addresses documentation is the reference for the Ethereum contract address used here.
This matters because the Cryptnox card is not preloaded with a FRAX menu entry. The user adds the route once, so the chain and contract choice made during setup determines which FRAX balance the wallet interface will display.
Use Add a Network when your FRAX is native on Fraxtal. Fraxtal is an EVM chain, so the address format is a 0x-prefixed 20-byte EVM address, but the asset is not added by entering the Ethereum token contract. In this route, the network itself is the item you add first.
That distinction is the most common setup point for a FRAX buyer to get right. A Fraxtal entry is for the native coin on Fraxtal. It should not be built from the Ethereum ERC-20 token contract, even though the address format looks like an Ethereum-style address. The route is network-based, not contract-based.
After Fraxtal is added, the Cryptnox app on iOS or Android is the interface used with the card for this FRAX route. The private key controlling the EVM address is created inside the secure element and is not exported from it.
Use Add a Token when your FRAX is the Ethereum ERC-20 legacy token. The contract address for this route is 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0. This address belongs to the Ethereum token route, not to the Fraxtal native-coin route.
The Ethereum path is useful only when the asset you want to hold is the ERC-20 token on Ethereum. The 0x-prefixed wallet address format is the same general EVM shape used on Fraxtal, so the contract address is the detail that separates the Ethereum token entry from a native network entry. Add the token once, then verify that the displayed asset corresponds to the Ethereum contract.
For this route, the Cryptnox card signs for the Ethereum address controlled by the key in the secure element. The app displays and manages the token entry, but the signing key is generated inside the card’s secure element and remains there.
FRAX on Fraxtal and the FRAX legacy token on Ethereum both use a 0x-prefixed 20-byte EVM address format. That shared address style can be convenient, but it is not the same as a shared asset entry. On Cryptnox, the route you add determines how the wallet identifies the balance: Fraxtal as an EVM network, or Ethereum as a token contract.
A buyer setting up both routes should expect two separate wallet entries. One represents the native coin on Fraxtal. The other represents the Ethereum ERC-20 token contract. The same card can hold the private key for the EVM address used by those entries, but the route selection remains chain-specific.
The Cryptnox hardware wallet tutorials are useful when you want general setup guidance, but the FRAX-specific choice is the chain route: Fraxtal network entry or Ethereum token entry.
The Cryptnox Crypto Hardware Wallet – Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card is the backup for the same wallet. For a FRAX holder, that means the backup is another card from the set rather than a recovery phrase written down by default.
The FRAX route you add does not change that backup model. Whether you configure Fraxtal for the native coin, Ethereum for the ERC-20 token, or both, the wallet is controlled by keys generated within the secure elements. The card contains an EAL6+-certified chip, and the finished product is a contact and NFC smart card that can be tapped to a phone or inserted into a reader.
Unlocking uses the phone’s own biometric unlock through the Cryptnox app. The card itself has no biometric sensor. This keeps the FRAX signing key in the card while the phone provides the app interface for adding Fraxtal or the Ethereum token contract.
The free Cryptnox app is available for iOS and Android. For FRAX, the app is where you add Fraxtal as an EVM network for the native coin or add the Ethereum ERC-20 token contract. The same app connects to Web3 through WalletConnect and works with MetaMask, which is relevant for buyers who already use EVM tools and want the card to hold the private keys.
If you are comparing card-based custody for multiple assets, the Cryptnox hardware wallet hub explains the broader product range, while this page narrows the decision to FRAX on Fraxtal and Ethereum. Buyers focused on other EVM routes can compare the FRAX setup with the Polygon hardware wallet page, and buyers comparing non-EVM or network-specific setups can review the Bitcoin hardware wallet page.
FRAX buyers who want to check additional network pages can also compare the setup with TRON hardware wallet information or the Ronin hardware wallet page. When your priority is FRAX specifically, the purchase path is the Cryptnox Crypto Hardware Wallet – Dual-Card Set, then adding either Fraxtal or the Ethereum contract during setup.
A FRAX wallet setup on Cryptnox is defined by the route you plan to use. If your FRAX is native on Fraxtal, your setup action is Add a Network. If your FRAX is the Ethereum legacy token, your setup action is Add a Token with 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0. The card is Swiss-engineered and uses a contact and NFC smart-card form factor, so the buying decision is different from choosing a device that depends on a cable connection.
The result is a FRAX setup with clear chain separation: Fraxtal is added as an EVM network, while Ethereum is added through the ERC-20 token contract. That is the detail to preserve when setting up, checking a balance, or deciding which route belongs in your wallet view.
No. FRAX is not pre-programmed on the card. Add Fraxtal through Add a Network when you want native FRAX on Fraxtal, or add the Ethereum ERC-20 legacy token through Add a Token using 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0.
The supported routes are FRAX as the native coin on Fraxtal and the Ethereum ERC-20 legacy token. Fraxtal is added as an EVM network. Ethereum is added as a token contract. Both use a 0x-prefixed 20-byte EVM address format.
For the Ethereum ERC-20 legacy token route, add 0x3432B6A60D23Ca0dFCa7761B7ab56459D9C964D0. Use that contract only for the Ethereum token route. It is not the way to add native FRAX on Fraxtal.
Yes. FRAX on Fraxtal and the Ethereum ERC-20 legacy token both use a 0x-prefixed 20-byte EVM address format. The address shape is similar, but the setup route is different: Add a Network for Fraxtal and Add a Token for Ethereum.
The private keys are generated inside the secure element and never leave it. For FRAX, that key can control the EVM address used after you add Fraxtal, the Ethereum token contract, or both routes in the Cryptnox app.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card is the backup. The default setup does not require writing down a recovery phrase, and importing an existing BIP39 recovery phrase is an advanced option.
No. The card itself has no biometric sensor. Unlocking uses the phone’s own biometric unlock through the Cryptnox app. The card remains the hardware key holder for the FRAX wallet, while the app provides the setup and use interface on iOS and Android.
Yes. The free Cryptnox app connects to Web3 through WalletConnect and works with MetaMask. For FRAX, add the correct route first: Fraxtal as an EVM network for native FRAX, or the Ethereum ERC-20 token contract for the legacy token.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.