Yes. Cryptnox can hold PENDLE through its Ethereum ERC-20 route after you add the token once with contract 0x808507121b80c02388fad14726482e061b8da827. PENDLE is not pre-programmed on the card, so the setup is a token-add step under an Ethereum account. Use a 0x-prefixed, 20-byte EVM address for receiving. The Ethereum account key that controls the PENDLE balance is created inside the secure element and is not exported.
CRYPTNOX products are also available worldwide through our official Amazon stores.
PENDLE is handled on Cryptnox as an ERC-20 token on Ethereum. That means the card secures the Ethereum account, and the PENDLE balance is associated with that account through the token contract 0x808507121b80c02388fad14726482e061b8da827. You do not receive a Pendle-only address from the card. You receive to the Ethereum address controlled by the Cryptnox-secured account.
The practical buyer question is not whether there is a separate Pendle edition of the product. There is not. The route is Ethereum plus ERC-20 token entry. After you add PENDLE once in the Cryptnox app or through a connected wallet interface, the token can be shown and used from the same Ethereum account that signs ERC-20 activity.
If you manage several assets and want to check their routes before buying, compare PENDLE against the broader Cryptnox coin and blockchain support page. For this asset, the relevant route remains the Ethereum ERC-20 route, not a preloaded PENDLE profile.
Because PENDLE is not pre-programmed, setup begins from the Ethereum account you intend to use. Open the Cryptnox app or the connected wallet interface you are using with Cryptnox, choose the token-add path, and enter 0x808507121b80c02388fad14726482e061b8da827 as the PENDLE contract. If the interface asks you to choose or confirm a network first, use Ethereum.
This is a one-time token entry for display and interaction. It does not create a new key for PENDLE. The token sits under the Ethereum address you already control with the card. That distinction matters when you are sending funds in: the address should begin with 0x and should be the same Ethereum account you expect to manage from Cryptnox.
For first-time card setup, review the Cryptnox hardware wallet tutorials before sending PENDLE to a newly prepared Ethereum address.
On Ethereum, an ERC-20 token is identified by its contract address. For PENDLE, that identifier is 0x808507121b80c02388fad14726482e061b8da827. The Ethereum address you control is where the balance is associated, while the contract is what tells the wallet interface which token is being displayed or used.
That is why adding PENDLE is different from simply opening an Ethereum account. The account gives you the 0x-prefixed EVM address. The PENDLE contract entry tells the wallet interface that the ERC-20 balance tied to that address should be treated as PENDLE. If you enter a different contract, you are no longer adding the PENDLE route described here.
The contract can be checked against public Ethereum token references such as Ethplorer’s PENDLE contract page. Pendle’s own documentation also discusses PENDLE in its tokenomics documentation, which is useful when you want the project-side context for the token itself.
The network check is Ethereum. The token check is the PENDLE ERC-20 contract. Both must be correct. A 0x address alone does not prove that the interface is showing the intended token, and a token symbol alone is not enough to confirm the contract. Match the chain, standard, and contract before receiving funds.
When you hold PENDLE through Cryptnox, the protected item is the Ethereum account key that can sign ERC-20 transactions involving the PENDLE contract. That private key is generated inside the secure element and does not leave it during signing. The PENDLE token balance is tied to the Ethereum address, while signing remains under the card’s secure-element control.
The chip platform inside the card includes an EAL6+-certified chip. For a PENDLE holder, the important point is where the Ethereum signing key lives: inside the secure element, rather than in the phone app or the connected wallet interface. The app and Web3 interface help you view and request actions; the card is what protects the account key used for PENDLE activity.
The product is a contact and NFC smart card. In PENDLE use, that means you can tap the card to a phone when using the Cryptnox app, or insert it into a reader when your setup calls for contact-card use. The card is dual-interface, so buying it for PENDLE does not limit you to a single card interaction method.
To buy the product used for this PENDLE setup, use the official Cryptnox Crypto Hardware Wallet – Dual-Card Set.
The Dual-Card Set ships uninitialised, so the PENDLE route is prepared during setup rather than arriving as a pre-configured token card. During initialisation, the seed is generated inside both secure elements. The second card is therefore the backup for the same wallet, including the Ethereum address that can hold PENDLE.
For a PENDLE buyer, this backup model matters because the token does not have a separate recovery path from the Ethereum account. If the Ethereum account is the account that controls PENDLE, the backup must protect that same account. The second Cryptnox card is created for that role during the initial setup.
By default, there is no recovery phrase to write down. Importing a 12- or 24-word BIP39 phrase is available as an advanced path, but the standard Dual-Card Set flow creates the backup through the second secure element. That keeps the default PENDLE workflow focused on the paired cards rather than on a written phrase.
If you are comparing this PENDLE route with other assets before choosing a hardware wallet, the Cryptnox hardware wallet collection hub is a useful starting point for asset-specific routes.
The free Cryptnox app is available on iOS and Android. For PENDLE, the app is where you manage the card and can unlock access using the phone’s face or fingerprint unlock; the card itself has no biometric sensor. The PENDLE balance still belongs to the Ethereum account secured by the card, not to the phone.
Cryptnox connects to Web3 through WalletConnect and works with MetaMask. In a PENDLE flow, the connected wallet should be on Ethereum, because the support route here is the ERC-20 token on Ethereum. If PENDLE does not appear automatically in the interface, add it with 0x808507121b80c02388fad14726482e061b8da827.
This setup is useful when a Web3 screen asks for an Ethereum wallet connection and then requests a signature or token action involving PENDLE. Review the network, account address, and token contract before approving. The interface may make PENDLE easy to view, but the buyer’s key-security decision is still the same: the Ethereum account key remains tied to the Cryptnox card.
The EVM-address pattern also appears on other asset routes, but the chain and token details differ. For comparison, see how Cryptnox presents hardware wallet support for Polygon and hardware wallet support for Ronin. For non-Ethereum examples, compare the separate Tron hardware wallet page or the Bitcoin hardware wallet page.
Choose the Cryptnox Crypto Hardware Wallet – Dual-Card Set for PENDLE if your intended PENDLE holding route is Ethereum ERC-20 and you are comfortable adding the token by contract address. The setup is straightforward for a buyer who wants to manage a 0x-prefixed Ethereum account and then add 0x808507121b80c02388fad14726482e061b8da827 as the PENDLE token contract.
The product is also a fit if you want a card-based wallet rather than a device that changes the PENDLE address model. PENDLE remains an ERC-20 token under an Ethereum address. The card protects the account key; the app and connected wallet interface help you manage the account, add the token, and review actions before signing.
It is especially relevant for buyers who want the second card to be the backup created during initialisation. Since PENDLE access depends on the Ethereum account, the backup card protects the same address used to receive and manage PENDLE. The cards are Swiss-engineered, and the product is sold as the Cryptnox Crypto Hardware Wallet – Dual-Card Set.
No. PENDLE is not pre-programmed. The card set arrives uninitialised, and PENDLE is added later as an ERC-20 token under an Ethereum account. Use the contract address 0x808507121b80c02388fad14726482e061b8da827 and confirm Ethereum as the network before receiving the token.
Add PENDLE with the Ethereum ERC-20 contract 0x808507121b80c02388fad14726482e061b8da827. The receiving address should be a 0x-prefixed, 20-byte EVM address controlled by your Cryptnox-secured Ethereum account. The contract and network both need to match.
No. For this setup, PENDLE uses the normal Ethereum address format: a 0x-prefixed, 20-byte EVM address. The card secures the Ethereum account, and the PENDLE token balance is associated with that address through the ERC-20 contract.
During initialisation, the Dual-Card Set generates the seed inside both secure elements. The second card is the backup for the same wallet. Because PENDLE is held through the Ethereum account, that backup card protects access to the same Ethereum address used for the PENDLE balance.
Yes. Cryptnox works with MetaMask and connects to Web3 through WalletConnect. For PENDLE, keep the connected wallet on Ethereum, add the ERC-20 contract if the token is not shown, and review the Ethereum address before approving any transaction request.
The private keys for the Ethereum account that can hold PENDLE are generated inside the card’s secure element and do not leave it. PENDLE itself is the ERC-20 token contract on Ethereum; the protected account key is what controls the address associated with the token balance.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.