Yes. The Cryptnox Crypto Hardware Wallet – Dual-Card Set can hold SUSHI as an ERC-20 token on Ethereum after you add the token once in the Cryptnox app. SUSHI is not pre-programmed on the card. Use contract 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2 with a 0x-prefixed Ethereum address controlled by private keys generated inside the card’s secure element.
CRYPTNOX products are also available worldwide through our official Amazon stores.
SUSHI is supported on Cryptnox as an ERC-20 token on Ethereum. The SUSHI balance is associated with an Ethereum account, and the receiving address uses the 0x-prefixed 20-byte EVM address format.
The SUSHI token entry is added once in the Cryptnox app. It does not ship already enabled on the card, so setup means adding the Ethereum token route before relying on the balance display. The contract to enter is 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2, and Etherscan identifies that Ethereum contract as the SUSHI token contract.
For buyers checking SUSHI alongside other assets, the Cryptnox coin and blockchain support page gives the wider supported-asset overview. For this page, the route is specifically SUSHI on Ethereum as an ERC-20 token.
Add SUSHI as a token attached to an Ethereum account, not as a separate chain account. In the Cryptnox app, add SUSHI once using the token contract 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2. The app route may be labelled Add a Token, or Add a Network where that is the setup path shown.
The contract matters because the SUSHI entry is the Ethereum ERC-20 token entry for that contract. After the token is added, the relevant address remains the Ethereum 0x address secured by the Cryptnox card. That address is the account controlled by private keys generated inside the secure element.
If you want to review the app flow before adding the SUSHI ERC-20 token, the Cryptnox hardware wallet tutorials are the right place to check product setup guidance.
SUSHI is an ERC-20 token on Ethereum, so control of the SUSHI balance depends on control of the Ethereum private keys for the 0x address. With the Cryptnox Crypto Hardware Wallet – Dual-Card Set, private keys are generated inside the secure element and never leave it.
The card is not a container for SUSHI tokens. It is the private-key holder for the Ethereum account that controls the SUSHI balance associated with that address. This distinction is useful for ERC-20 tokens because the SUSHI token entry is identified by the Ethereum contract address while the account is still the Ethereum address.
The secure element is where the private keys for the Ethereum account are generated. The chip platform used for that secure element is an EAL6+-certified chip. For a SUSHI holder, the practical result is that the Ethereum keys controlling the SUSHI address are created inside the secure element and are not exported.
Unlocking the wallet flow uses the phone’s fingerprint or face check through the Cryptnox app. The card itself has no fingerprint reader and no face sensor. The phone provides the app interface, while the card remains the smart card tied to the private keys for the Ethereum address used for SUSHI.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card becomes the backup for the same wallet. For SUSHI, that backup protects access to the Ethereum address that controls the ERC-20 token balance.
This matters before a buyer receives SUSHI. If the primary card is unavailable, the second card from the same initialised set is the backup for the wallet. The default backup path is card-based rather than a phrase written on paper.
The result is a SUSHI wallet setup with two cards for one wallet: one primary card and one backup card, both tied to the secure-element setup created during initialisation.
The Cryptnox card is a contact and NFC smart card. For SUSHI, you can tap the card to a phone when using the Cryptnox app, or insert the card into a reader when that is the chosen access method. The form factor is dual-interface, so it is not limited to a single contactless path.
The phone route is useful when adding SUSHI in the Cryptnox app because the app is available free on iOS and Android. In that flow, SUSHI is added as an Ethereum ERC-20 token by contract address, and the Ethereum account remains the 0x address controlled by the card’s secure element.
The same smart-card format applies whether the buyer is checking a SUSHI balance, adding the SUSHI contract entry, or preparing to connect the Ethereum account through the app.
The Cryptnox app is free on iOS and Android, connects to Web3 through WalletConnect, and works with MetaMask. For SUSHI, the account involved is the Ethereum 0x address secured by the Cryptnox card, with the SUSHI token entry identified by contract 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2.
When a Web3 service asks for an Ethereum wallet, use the address that holds the SUSHI ERC-20 token. The SUSHI token entry identifies the asset, while the private keys generated inside the secure element control the Ethereum account.
CoinGecko lists SUSHI as the Sushi token. On Cryptnox, the setup remains the Ethereum ERC-20 route using the contract address shown on this page.
A buyer adding SUSHI should select the Ethereum ERC-20 path and the Ethereum contract address for SUSHI. The receiving address for this setup is a 0x-prefixed EVM address. That is the address controlled by the Cryptnox card after the wallet is set up.
This route is different from choosing a hardware wallet page for another chain. If you are comparing network-specific setups, the Cryptnox hardware wallet collection is the parent collection for asset wallet pages. A TRON hardware wallet route uses a different chain choice from SUSHI on Ethereum. A Polygon hardware wallet route uses an EVM-style address format, but it is still a separate network route from the SUSHI ERC-20 setup on Ethereum.
The same distinction applies outside EVM-style networks. The Bitcoin hardware wallet page is for a different asset model and a different address family. The Ronin hardware wallet page is also a separate route from the Ethereum ERC-20 setup used for SUSHI. For SUSHI, the exact match is Ethereum, ERC-20, contract 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2, and a 0x-prefixed EVM address.
The product for this SUSHI setup is the Cryptnox Crypto Hardware Wallet – Dual-Card Set. It is a pair of uninitialised contact and NFC smart cards that are set up together, with the second card becoming the backup for the wallet that controls the Ethereum SUSHI address.
For SUSHI, the buying decision is about securing the Ethereum private keys that control a 0x address. Those keys are generated inside the secure element and never leave it. The SUSHI token entry is then added in the Cryptnox app with the Ethereum contract address, so the app can show the ERC-20 token route for the same Ethereum account.
The product is Swiss-engineered, and the cards are made in Switzerland. For a SUSHI holder, the key points are the Ethereum ERC-20 route, the contract address entered once in the app, the secure-element key model, and the second card created as the backup during setup.
No. SUSHI is not pre-programmed on the card. Add it once in the Cryptnox app as an Ethereum ERC-20 token using contract 0x6B3595068778DD592e39A122f4f5a5cF09C90fE2. The app route may be Add a Token, or Add a Network where that is the path presented.
Use an Ethereum address in the 0x-prefixed 20-byte EVM format. The SUSHI route here is ERC-20 on Ethereum, so the address is the Ethereum account controlled by private keys generated inside the Cryptnox card’s secure element.
The card protects the private keys that control the Ethereum address associated with the SUSHI balance. SUSHI is an ERC-20 token on Ethereum. The private keys for that Ethereum address are generated inside the secure element and never leave it.
The Dual-Card Set ships uninitialised. During setup, the seed is generated inside both secure elements, so the second card becomes the backup for the same wallet. For SUSHI, that means both cards are tied to the Ethereum address that controls the ERC-20 token balance.
No recovery phrase has to be written down by default. The default backup is the second card from the Dual-Card Set, created during initialisation because the seed is generated inside both secure elements. Importing a 12- or 24-word BIP39 phrase is an advanced option.
Yes. The Cryptnox app is free on iOS and Android, connects to Web3 through WalletConnect, and works with MetaMask. For SUSHI, use the Ethereum account secured by the card and add the ERC-20 token contract once in the app.
No. The card itself has no fingerprint reader and no face sensor. Unlocking the wallet flow uses the phone’s fingerprint or face check through the Cryptnox app, while the card remains the contact and NFC smart card tied to the private keys.
No, and on this network that is not a limitation. The Cryptnox wallet uses one address per chain. HD address rotation comes from Bitcoin’s UTXO model and the BIP32/BIP44/BIP49/BIP84 derivation scheme; on account-model networks each account is a single fixed address by design, so the question does not apply in the same way. Cryptnox’s single-address-per-chain behaviour matches how these networks work.
At the cryptography layer the card derives keys along BIP32 and SLIP-10 paths, one path per supported chain, though that is not exposed in the app as multi-address management.
Yes. Cryptnox ships worldwide from the official CRYPTNOX store. Orders to Switzerland, the European Union and the United States are dispatched from stock already held in each of those regions, so the parcel does not cross a customs border into your country and there are no import duties to pay. Orders to other destinations are shipped internationally, and any import duties or local taxes are set by the destination country and are the recipient’s responsibility. Current shipping rates are shown at checkout.